Reference Documents
- DCC Glossary
- The SoundTraxx Guide to DCC
- The SoundTraxx Guide to Successful Soldering
- The SoundTraxx Guide to Product Identification
Speaker Reference Documents
- Pairing a Speaker and a Decoder to Avoid Audio Amplifier Damage
- Speaker Selection Videos on our YouTube Channel
CurrentKeeper Documents
- CurrentKeeper Reference
- CurrentKeeper Instruction Sheet
- SoundTraxx CurrentKeeper FAQ YouTube Playlist
Explore helpful videos on connecting CurrentKeepers to SoundTraxx decoders, along with tips, tricks, and troubleshooting guidance to keep your models running smoothly. Contact our Support Team for more information or guidance. - CurrentKeeper Installation Instructions for the TSU-1000
- CurrentKeeper Installation Instructions for the TSU-750
- CurrentKeeper Installation Instructions for the TSU-AT1000
Wiring References
Technical Notes
Technical Note #8 - Wiring Multiple Speakers to a Tsunami
Technical Note #9 - Speaker Polarity
Technical Note #10 - Using 1.5V Lightbulbs with a Tsunami
Technical Note #11 - Using a Tsunami with an Under table Speaker
Technical Note #14 - Connecting a Smoke Generator to a Tsunami
Technical Note #15 - SoundCar Intelligent Consisting (NCE-style Advanced Consist)
Technical Note #16 - Testing NMRA-Compatible 8-Pin Connector
Technical Note #17 - Wiring the ECO-PNP and TSU-PNP for 1.5V Lightbulbs
Technical Note #18 - Wiring the ECO-PNP and TSU-PNP for LEDs
Technical Note #32 - Causes of Damage to Decoder’s Audio Amplifier